 | 8454J | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks.
Hand shaving[?] |
 | 8454K | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
 | 8329B | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
 | 8329E | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
 | 8329F | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types] 1:1 |
 | 8329G | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
 | 8329H | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
 | 8338B | (none) | (none) | (none) | [A-B] Silver earrings.
A pair.
One broken.
Ordinary type with broadened ends. [drawing] |
 | 8524B | (none) | (none) | (none) | Silver diadem
Broken
It appears to be formed of 2 separate parts:
(A) A strip of thin silver plate (apparently plain) 0022 wide and about 018 long tapering to curved ends wherein are attachment holes: and
(B) A strip of thin silver 005 wide twisted with a spiral coil so as to act as a spring: this appeared to be attached to (A) and to go round the back of the head. |
 | 8359B | (none) | (none) | (none) | [A] Cylinder seal of lapis lazuli on a
[B] silver bangle.
The bangle is of flattened silver wire now distorted and broken: the wire passes through the cylinder.
Cylinder, 2 registers: above; inscription. 1 human figure, and rampant animals. below; 1 human figure and rampant animals. |
 | 8428 | (none) | (none) | B17080 | Axe head
Silver
[drawing]
Type A3. |
 | 8431 | (none) | (none) | B17091 | Whetstone
Perforated at top
Facetted
[drawing c. 1:1] |
 | 8329C | (none) | (none) | B17374A | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
 | 8329D | (none) | (none) | B17374B | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types] 1:1 |
 | 8477A | (none) | (none) | B17392 | [A-D] 4 copper staples.
Made from a single piece of copper bent to form an arch, ends overlap at bottom
[drawing] c. 1:1 |
 | 8437 | (none) | (none) | B17401 | Axe head. Copper. Common type - with sharp strengthening ridge at back of shaft. XX. |
 | 8466E | (none) | (none) | B17613 | [A-E] 5 weights, [A-D] 4 hematite, [E] 1 silver lentoid. hematite - 1 lentoid, 1 conoid, 1 ovoid, 1 roughly cylindrical, slightly bigger at base than at top. weights: Types I, II, III, IV. |
 | 8466B | (none) | (none) | B17615 | [A-E] 5 weights, [A-D] 4 hematite, [E] 1 silver lentoid. hematite - 1 lentoid, 1 conoid, 1 ovoid, 1 roughly cylindrical, slightly bigger at base than at top. weights: Types I, II, III, IV. |