 | 8454A | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454B | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454C | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454D | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454E | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454F | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454G | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454H | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454I | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454K | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks. |
| 8454J | (none) | (none) | (none) | [F-K] 6 black shale disks and [A-D] 4 square bone plaques - line engraving on one face of each plaque.
(A) floral design.
(B) similar.
(C) lion. Portion of one side missing.
(D) 4 sets of concentric curves; clear space in middle.
[E] Also, 3 fragments of an engraved bone pin. The bone disks have a shallow hole in the center, half as deep as the disk is thick. This was intended to receive a wooden inlay. Wooden inlay is intact in one of the disks.
Hand shaving[?] |
| 8359A | (none) | (none) | (none) | [A] Cylinder seal of lapis lazuli on a
[B] silver bangle.
The bangle is of flattened silver wire now distorted and broken: the wire passes through the cylinder.
Cylinder, 2 registers: above; inscription. 1 human figure, and rampant animals. below; 1 human figure and rampant animals. |
| 8359B | (none) | (none) | (none) | [A] Cylinder seal of lapis lazuli on a
[B] silver bangle.
The bangle is of flattened silver wire now distorted and broken: the wire passes through the cylinder.
Cylinder, 2 registers: above; inscription. 1 human figure, and rampant animals. below; 1 human figure and rampant animals. |
| 8449B | (none) | (none) | (none) | [A] Copper cullender.
[B] Copper bath shaped bowl.
Cullender found inside copper bowl and corroded with it.
Part of rim of cullender missing and base cracked.
Copper bowl broken and fragmentary. [drawing]
Cullender same type as U.7869.
[Type] LXIII |
| 8449A | (none) | (none) | (none) | [A] Copper cullender.
[B] Copper bath shaped bowl.
Cullender found inside copper bowl and corroded with it.
Part of rim of cullender missing and base cracked.
Copper bowl broken and fragmentary. [drawing]
Cullender same type as U.7869.
[Type] LXIII |
| 8329D | (none) | (none) | B17374B | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types] 1:1 |
| 8329F | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types] 1:1 |
| 8329A | (none) | 1928,1009.271 | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8329B | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8329C | (none) | (none) | B17374A | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8329E | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8329G | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8329H | (none) | (none) | (none) | [A-H] Copper arrowheads. 8 in all. Two slightly different types, one having a more angular shoulder than the other. The tangs fitted into reed shafts of which traces were visible in the soil (half of the blade of one missing: the others complete). [drawing of two types 1:1] |
| 8378A | (none) | (none) | (none) | [A-F] Cockle shells. 3 pairs. Containing paints. |
| 8378B | (none) | (none) | (none) | [A-F] Cockle shells. 3 pairs. Containing paints. |