Axes, Choppers, Scrapers
This category includes objects used for chopping or scraping.
This category includes objects used for chopping or scraping.
Objects: Axes, Choppers, Scrapers Export: JSON - XML - CSV
Object | U Number | Museum Number (UPM Date Reg Number) | Museum Number (BM Registration Number) | Museum Number (UPM B-number) | Description (Catalog Card) |
---|---|---|---|---|---|
![]() | (none) | (none) | 1928,1009.216 | (none) | (none) |
![]() | (none) | (none) | 1928,1009.217 | (none) | (none) |
8516 | (none) | 1928,1009.219 | (none) | Copper adze In bad condition Type 5 (new) | |
![]() | 8698 | (none) | 1928,1009.220 | (none) | Copper axe. Normal type. [drawing] [type] XIX |
8769 | (none) | 1928,1009.221 | (none) | Copper hoe? or axe? [drawing] not to be published. Crescent shaped - single piece of metal with a V shaped shaft for receiving a wooden handle. 2 rivets, one on each side of the opening keep the shaft firm. If the object was a hoe it had a handle coming down vertically into the apex of the V, if an axe the handle was horizontal to it. | |
9059 | (none) | 1928,1009.228 | (none) | Copper axe Unusual type Good condition [drawing] [Type] VIII variant | |
![]() | 9135 | (none) | 1928,1009.237 | (none) | Copper chisel Square-section stem, 0005 sq. [Type] IV |
9199 | (none) | 1928,1009.289 | (none) | Copper axe [drawing] [Type] X | |
![]() | 9103 | (none) | 1928,1009.295 | (none) | Copper chisel Triangular head, flat and wide stem. [type] IV |
8505 | (none) | 1928,1009.296 | (none) | Copper chisel with triangular end: cutting edge 004 across [Type] IV | |
8183 | (none) | 1928,1009.297 | (none) | Copper blade. Very heavy blade, straight sided and slightly tapering, the haft end missing. [drawing] | |
9072 | (none) | 1928,1009.298 | (none) | Copper chisel Slightly convex sides [drawing] 2:5 [type] V [struck out on card: vii] | |
![]() | 9133 | (none) | 1928,1009.299 | (none) | Copper chisel Flat stem, triangular head |
9104 | (none) | 1928,1009.300 | (none) | Copper chisel Flat head, square shaft. [type] VII B | |
9105 | (none) | 1928,1009.301 | (none) | Copper chisel Square shaft, flat ended [type] VII B | |
9107 | (none) | 1928,1009.302 | (none) | Copper chisel Slender square stem, round headed. | |
9106 | (none) | 1928,1009.303 | (none) | Copper chisel. Flat rectangular stem with width at right angles to cutting edge [Type] Chisel 4 (New) | |
![]() | (none) | (none) | 1928,1009.304 | (none) | (none) |
![]() | 9207 | (none) | 1928,1009.305 | (none) | Copper axe Thin flat blade turned over at one end to form socket [drawing] Type S5 (new) |
![]() | 9191B | (none) | 1928,1009.306 | (none) | [A]Copper Knife, [B]axe & [C]reticule all corroded together Knife straight-sided thus: [drawing] [Type] II axe, broken, thus: [drawing] [type] X |
8506 | (none) | 1928,1009.307 | (none) | Copper axe Bent-over type (broken) For hafting, see field notes | |
8508A | (none) | 1928,1009.312 a | (none) | [A-B] Two copper razors(?) Oxidised together (handle of one broken, but there) [drawing] | |
8508B | (none) | 1928,1009.312b | (none) | [A-B] Two copper razors(?) Oxidised together (handle of one broken, but there) [drawing] | |
![]() | 10431 | (none) | 1928,1010.10 | (none) | Gold Chisel Flat type with cutting edge at right angles to the width Type IV.a |
![]() | 10432 | (none) | 1928,1010.11 | (none) | Gold Chisel Flat type with cutting edge at right angles to width Type IV |