Axes, Choppers, Scrapers
This category includes objects used for chopping or scraping.
This category includes objects used for chopping or scraping.
Objects: Axes, Choppers, Scrapers Export: JSON - XML - CSV
| Object | U Number | Museum Number (UPM Date Reg Number) | Museum Number (BM Registration Number) | Museum Number (UPM B-number) | Description (Catalog Card) |
|---|---|---|---|---|---|
| 8506 | (none) | 1928,1009.307 | (none) | Copper axe Bent-over type (broken) For hafting, see field notes | |
| 8508A | (none) | 1928,1009.312 a | (none) | [A-B] Two copper razors(?) Oxidised together (handle of one broken, but there) [drawing] | |
 | 8515 | (none) | (none) | (none) | Copper adze Type 5 (new) |
| 8516 | (none) | 1928,1009.219 | (none) | Copper adze In bad condition Type 5 (new) | |
| 8546 | (none) | (none) | (none) | Copper dagger or knife With 3 rivets in short tang Normal striaght-sided type [drawing] [Type] II |
| 8559 | (none) | (none) | (none) | Copper axe Miniature Type A5 (new) |
| 8577 | (none) | (none) | (none) | Copper chisel. Cutting edge at right angles to width of stem. [drawing] Type 4 (new). |
| 8581 | (none) | (none) | (none) | Copper axe. Normal type but shorter and with the lower edge forming a continuous line with the socket-curve. [drawing] |
| 8582 | (none) | (none) | (none) | Copper chisel Triangular top [Type] IV |
| 8589 | (none) | 1928,1009.208 | (none) | Copper axe [drawing] [Type] XIX | |
| 8590 | (none) | (none) | (none) | Copper axe [drawing] [Type] XIX |
| 8635 | (none) | (none) | (none) | Copper axe Blade broken off [drawing] [Type] XX |
| 8676 | (none) | (none) | (none) | Copper chisel(?) Very slender square section, shaft flattened to narrow cutting edge. [type] VII |
| 8677 | (none) | (none) | (none) | Copper chisel(?) Very slender square section, shaft flattened to narrow cutting edge [type] VII |
| 8698 | (none) | 1928,1009.220 | (none) | Copper axe. Normal type. [drawing] [type] XIX |
| 8768 | (none) | (none) | (none) | Chisel. Copper. Flat. Portion of tip missing. [drawing 2:5] II. |
| 8769 | (none) | 1928,1009.221 | (none) | Copper hoe? or axe? [drawing] not to be published. Crescent shaped - single piece of metal with a V shaped shaft for receiving a wooden handle. 2 rivets, one on each side of the opening keep the shaft firm. If the object was a hoe it had a handle coming down vertically into the apex of the V, if an axe the handle was horizontal to it. | |
| 8778 | (none) | (none) | (none) | Copper axe. Thin metal. Common type. Flat blade. Broken in 3 pieces. [drawing] X. |
| 8782 | (none) | (none) | (none) | Thin flat blade badly bent. Broken in two pieces. Abnormally long blade. [drawing] |
| 8789 | (none) | (none) | (none) | Copper axe? Flat blade. Thin copper with short turn over. [drawing] |
| 8844A | (none) | (none) | (none) | Copper chopper and copper pin corroded onto it. Chopper has flat blade and turned over tang. [drawing] [Type] IV |
| 8933 | (none) | (none) | (none) | Copper adze. [drawing] |
| 8934 | (none) | (none) | (none) | Copper chisel. Flat, with triangular head and on the upper part are preserved the marks of a string binding, apparently over leather (?) |
| 8989 | (none) | (none) | (none) | Copper razor (?) [drawing 1:1] |
| 9003 | (none) | (none) | (none) | Copper axe. Thin metal. Warped. Short turn over at haft end. Kish type. [drawing] [Type] V4H? |